Vibration Level Meters

Vibration Level Meters & Accelerometers

[Rion] [Castle] [Extech] [MMF] [CVK]

UV-15
Vibration Meter

Enables wide range vibration measurement
with combination system for up to 16 channels

UV-15 provides connectivity for piezoelectric accelerometers,
accelerometers with integrated preamplifier, and TEDS compliant accelerometers. Each unit has its own display showing settings, measurement values, and a bar graph indication. Adding the Interface Unit UV-22 allows connection to a computer for control of settings and operation and transfer
of measurement data.

SA-78
FFT Analyzer

SA-78 is a hand-held 2-channel FFT analyzer
which can be used in the field for sound and
vibration FFT, octave and 1/3 octave analysis.

SA-77
Signal Analyzer

Discontinued- Available only for rental or loaner.

Hand-held, battery-operated single-channel FFT analyzer. Designed for quality control, machine fault detection, diagnosis, vibration analysis in the field. Direct input for microphone or accelerometer with preamplifier. 

VM-63a
Vibration Meter 

Accelerometer, preamplifier, and display are installed in a pocket-size vibration meter. Simply press the VM-63 against a vibrating object to capture the digital measurement. Easy to read.

VA-20
Machinery Fault Checker

Brand new technology for predictive or preventive maintenance and fault detection.

VM-70
Multi-Machine Checker

DISCONTINUED.

This "pencil" unit is designed to check for defects and aging symptoms in rotating machinery. Temperature and vibration

VM-82
Vibration Meter 

Easy-to-use vibration meter for acceleration, velocity, and displacement measurements in m/s², G, mm/s, and mm. Especially suited for routine maintenance and monitoring of rotational machinery. Internal memory stores up to 1000 data. 

VM-83
Vibration Meter

• Wide range vibration with various types of accels.
• Low frequency measurement to 0.1 Hz
• Perfect for bridge, structure, and building vibrations
• Piezo or servo accels
• Charge or Voltage
• Displacement, velocity, or acceleration output
• High- and low-pass filters
• Max hold, peak hold
• 20 hr battery life
• Accel 0.3 to 1000 m/sec2

VM-54
Vibration Meter

• Instrument for vibration analysis for human response
• Ship vibration
• Whole body vibration (truck and vehicle driver, for example)
• Hand - arm vibration (power saws, concrete vibrators, for example

Please Contact for More Information

UV-06
Dual-Channel Charge Amplifier 

Dual-channel charge amplifier in a slim case for multi-channel vibration measurement. A pull-down panel makes it easy to set the accelerometer sensitivity. Integrating circuits allow velocity and displacement. 

UV-05
Vibration Meter Unit

Wide measuring range. Can be battery operated for general-purpose vibration measurements and monitoring. Thiry-mm-width slim case design, no rack required. Built-in RS-232C interface. Option: Display Unit UV-12, Battery Unit BP-07. 

UV-12 A
Display Unit

Display and power supply unit for UV-05 or UN-04. Up to ten of UV-05's or UN-04's connectable. Incorporates interface of GP-IB and RS-232C. Measurement value on display: five digits

Vibration Analyzer VA-11 
Sophisticated Vibration Analyzer With FFT Capability 

Simple operation using only ten switches. 

• Digital processing allows simultaneous display of acceleration, velocity, and displacement. 
• 16-bit A/D converter achieves 80 dB dynamic range. 
• Large LCD Panel with EL backlight and 192 x 128 dot resolution. 
• Memory card slot for speedy transfer of data to a PC. 
• Operates for more than 22 hours on one set of batteries (alkaline). 
• Internal memory holds up to 55 data sets without the need for a memory backup battery. 

Vibration Analyzer VA-12

Vibration meter VA-12 with FFT analysis function.
Real-time analysis frequency 20 kHz.
Portable vibration analyzer for equipment diagnosis and on-site measurements.
The color TFT display (240x320dots) makes it easy to view in any weather conditions,outdoors,indoors, or in a dark location.
24-Bit A/D conversion provides wide 110dB dynamic range.
Waveform analysis software CAT-WAVE and comparator software CAT-VA-CMP are available.

More Information

NA-18
Real Time Analyzer for Infrasound and Low-frequency Sound & Vibration

Discontinued- For rental only

The NA-18 used to evaluate low frequency sounds that are not audible to most humans. Some people can hear infrasound and those that don't can perceive vibrations produced in walls and windows. Manual or automatic storage, G-weighting network per ISO 7196, frequency range of 1-1000 Hz.