Scantek Press Release

For Immediate Release

CONTACT:

Richard J. Peppin
(Day) 410-290-7726
PeppinR@scantekinc.com

Columbia, MD, June 9, 2008: Scantek, Inc. is pleased to announce the availability of the two new noise dosimeters from CESVA, the DC-112a and DC-112k. Both comply with the American standard ANSI S1.25-1991 class 2 and enable the health and safety protection measures of workers against risks arising from exposure to noise, evaluated according to OSHA, MSHA, DoD, ACGIH, and NIOSH.

Both instruments allow the use of frequency weightings (A or C), time weighting (F or S), exchange rates (3, 4, 5, or 6) and measure simultaneously using 2 programmable threshold levels [LTH or LTH’], which means that only one measurement is needed for norms which require a double threshold.

These dosimeters have a high storage capacity with 64 MBytes, which enables the time history of the measurement to be stored. In addition, the data can be downloaded, and the DC-112a or DC-112k recharged via the USB port.

Thanks to the Projection of Parameters the exposure values (D and TWA) can be obtained without the need to measure for the whole exposure time.

The DC-112a is a dosimeter real time spectrum analyser in octave bands (NRR + Octaves). The DC-112k (NRR) is the same as the DC-112a but without analysis in octave bands, and can be converted into a DC-112a by adding the EF-112a frequency extension module

# # #