N-276 Dodecahedron Loudspeaker

http://www.norsonic.com/uploads/nor276.jpg

http://www.norsonic.com/uploads/mlg_easy.jpg

The Nor276 is a high power loudspeaker with omnidirectional characteristics.

 

It fulfils the following standards; ISO 140-3 Annex C (Laboratory measurements), ISO 140-4 Annex A (Field measurements) and the ISO3382 Annex A (Reverberation Time measurements).

 

The output power level is up to 120 db re. 1pW for a pink noise signal.

 

The Nor276 has been designed for continuous operation for more than one hour at full power. It is designed to be used with Nor280 Power Amplifier only. Using other amplifiers may damage the speakers and will void the warranty.

 

The dimension is 332 mm (13”) diameter.

 

 

http://kunde.123onweb.no/norsonicnett/uploads/kundefiler/Nor276_Lw.jpg

 

 

Typical sound power level vs. frequency of the loudspeaker Nor276 
when used with the pink noise source and equalizer included in the Power Amplifier Nor280.

 

 

http://kunde.123onweb.no/norsonicnett/uploads/kundefiler/Noise%20Sources/ISO140_directivity.jpg

 

Maximum and minimum directivity indices in different directions

according to the requirements in ISO 140-3 and ISO 140-4 compared to the tolerance limits.

 

 

http://kunde.123onweb.no/norsonicnett/uploads/kundefiler/Noise%20Sources/ISO-3382-1-Direktivity.jpg

 

Maximum and minimum directivity indices in different directions 
according to the requirements in ISO 3382-1 compared to the tolerance limits.

 

 

 

 

http://kunde.123onweb.no/norsonicnett/uploads/kundefiler/Noise%20Sources/Nor276-retning.jpg

 

 

 

Sound power in different directions for Nor276. The measurement is done in a horizontal plane through the centre of the loudspeaker. The graph shows the response for a sinusoidal signal at 100 Hz, 315 Hz, 1 kHz and 3,15 kHz.